|
|
Petri Dishes
Click to jump to:
 |
 |
 |
| Petri dishes are engineered for optimum flatness and uniform thickness.
Molded from polysterene. Sterile packaged. Vented and Non-Vented. |
Vented Petri Dishes
| PD1000 |
100 X 15mm |
Petri Dish, stackable, vented |
600 |
$75.00 |
add to cart |
| PD1001 |
60 X 15mm |
Petri Dish, stackable, vented |
500 |
$75.00 |
add to cart |
| PD1002 |
150 X 15mm |
Petri Dish, slippable, vented |
100 |
$75.00 |
add to cart |
| PD1003 |
100 X 15mm |
Petri Dish, slippable, vented |
500 |
$75.00 |
add to cart |
| PD1004 |
95 X 15mm |
Petri Dish, slippable, vented, Media Saver |
500 |
$120.00 |
add to cart |
| PD1008 |
60 X 15mm |
Petri Dish, slippable, vented |
500 |
$75.00 |
add to cart |
| PD1009 |
75 X 50mm |
Petri Dish, stackable |
500 |
$120.00 |
add to cart |
| PD1010 |
65 X 15mm |
Petri Dish, stackable, vented with grids for bio-counts |
500 |
$150.00 |
add to cart |
|
Non-Vented Petri Dishes For Nematode Research
| PD1007 |
60 X 15mm |
Petri Dish, semi-stackable, non-vented |
500 |
$95.00 |
add to cart |
| PD1006 |
60 X 15mm |
Petri Dish, slippable, non-vented |
500 |
$95.00 |
add to cart |
| PD1005 |
60 X 15mm |
Petri Dish, stackable, non-vented |
500 |
$95.00 |
add to cart |
|
Semi-stackable: Top of lid has stacking leg
Stackable: Lid is recessed and the stacking leg of the bottom dish lies in this recessed area. Automation friendly
Slippable: Lid does not have stacking leg, allowing bottom leg to slide easily. Automation friendly
|
|
Glass Petri Dish
 |
 |
|
Uniform thinckness and size. Top and bottom. Made of soda lime glass.
|
|
|
| PD1011 |
60 x 17mm |
Glass Petri Dish |
30 |
$110.00 |
add to cart |
| PD1012 |
75 x 17mm |
Glass Petri Dish |
30 |
$125.00 |
add to cart |
| PD1013 |
90 x 12mm |
Glass Petri Dish |
30 |
$150.00 |
add to cart |
| PD1014 |
100 x 15mm |
Glass Petri Dish |
30 |
$150.00 |
add to cart |
| PD1015 |
150 x 30mm |
Glass Petri Dish |
30 |
$175.00 |
add to cart |
|
Wire Petri Dish Holder
 |
|
|
Epoxy coated. Stand will hold up to six (6) 100mm petri dishes. Made of epoxy coated steel wire. Autoclavable.
Dimensions: 3.3 x 3.5 x 4.3".
|
|
|
Petri Dish Dispenser
|
Includes mounting screws. This sturdy acrylic dispenser will hold up to 30 100mm Petri dishes in two
easy to access partitions. Place on the counter or on a wall. Measures: 8 x 4 x 9" (20 x 1- x 23cm)
|
|
|
|
 |
Disposable Cell Spreaders
 
|
|
|
L and T shaped spreader design for quick smooth spreading. Polypropylene spreaders are ideal for microbiological applications. Smooth surface. Come, sterile, in a bag of ten (10) for immediate use without flaming.
|
|
|
| DSC |
Disposable L-Shaped Cell Spreaders, 10x10 (sterile) |
100 |
$15.00 |
add to cart |
| DSC-001 |
Disposable T-Shaped Cell Spreaders, 10x10 (sterile) |
100 |
$15.00 |
add to cart |
|
Cell Scrapers and Cell Lifter
|
These scrapers and lifters are individually wrapped and y radiation sterilized. Lifters are ideal for use with dishes and cell culture clusters. Scrapers used for mechanical harvesting. Blade position may be controlled to adjust to most difficult angles for gentle cell removal. 100/case. |
|
|
|
|
|
| CL-18 |
Small Cell Scraper |
18mm |
180mm |
Yes |
100 |
$125.00 |
add to cart |
| CL-25 |
Large Cell Scraper |
18mm |
250mm |
Yes |
100 |
$125.00 |
add to cart |
| CS-18 |
Cell Lifter |
20mm |
180mm |
Yes |
100 |
$100.00 |
add to cart |
|
Rubber Policeman
 |
|
|
Diagonal cur rubber policeman with 200 mm (8") glass rod. Policeman are made of brown natural Rubber, 62 mm (2 7/16") long, sealed at one end and cut diagonally. 12/pack.
|
|
|
| POL-007 |
Rubber Policeman with 200mm x 5mm rod |
$21.00 |
add to cart |
|
Stainless Steel Cell Spreaders
|
Flame or autoclave sterilizable. Smooth triangular ends for smooth spreading. Upturned end will not cut agar.
Use smaller spreader for 60mm plates; larger spreader for 100mm plates. Handle measures 8".
|
|
|
|
 |
| SSCS-S |
Stainless Steel Cell Spreader, small |
16mm |
1 |
$12.00 |
add to cart |
| SSCS-L |
Stainless Steel Cell Spreader, large |
25mm |
1 |
$12.00 |
add to cart |
|
Innoculating Loops And Needles, Disposable
 |
|
- Irradiation Sterilized
- Precision molded from biologically inert polymers
|
|
|
| L-1001 |
Bioloop, 1 ul/needle |
Light Green |
25 |
$45.00 |
add to cart |
| L-1002 |
Bioloop, 10 ul/needle |
Light Blue |
25 |
$45.00 |
add to cart |
|
Nichrome Inoculating Loops and Needles with Handles
|
These inoculator loops and needles conform to ASM, APHA and FDA standards. 25-gauge for general use. Plain Aluminium handle measures 8'' (20 cm). Loops and needles measure: 3'' (7.6 cm).
|
|
|
|
|
|
|
|
|
Bacti-Cinerator IV Loop Sterilizer
- Sterilize loops and needles with infrared heat
- Safeguards laboratory personnel
- Prevents infections splatter and contamination
- Ideal for anaerobic chambers
- Weighed base for stability
- Operates on 120V 60Hz U.L. Approved
(Available for use on other currents)
|
|
|
|
 |
|
 |
| BC-2001 |
Bacti-Cinerator Loop Sterilizer |
1 |
$300.00 |
add to cart |
| BC-2002 |
Bacti-Cinerator Replacement Element |
1 |
$150.00 |
add to cart |
|
Bacti-Cinerator Accessories
 |
|
Loop Rest
Product Description:
This addition to your incinerator will pay for itself many times over. The Loop Rest
helps in protecting the handle of loops from overheating and melting.The loop rest is
grooved to accommodate all sizes of handles. The unit attaches easily to the incinerator.
|
|
|
 |
|
Slide Dryer
Product Description:
This innovative device dries slides quickly and safely. The Slide Dryer fits on easily to
the outside screening of a bacteriology incinerator. You can use it for drying of such specimens
as sputums, exudates and other thick mucous fluids with no morphological distortions. It is
also ideal for use in dissolving epithelium using the KOH mycology technique. Dryers available
in 1, 2, or 3 sections. (two place pictured)
|
|
|
Loop Support
 |
|
Loop Support
Product Description:
This addition to your incinerator will pay for itself many times over. Loop Supports avoid burning your desk with hot inoculating loops and needles. This device is slotted to accommodate up to four loops. Mounts easily onto side of incinerator. |
|
|
Eddy Jet Spiral Plater
Definitive plating instrument that uses disposable microsyringes for the spiral inoculation technique.
Distributes the liquid sample on the agar in an exponential or logarithmic decreasing manner from the
center to the periphery.
Once incubated, the Petri plate shows a distribution of colonies smaller and more crowded in the center,
and larger and more separated toward the periphery.
Counting colonies can be done automatically (see Countermat Flash) or manually, using the
appropriate grid.
By using disposable sample delivery syringes, the Eddy Jet has revolutionized the spiral plating
technique. It has eliminated both the possible sample cross contamination that can occur in other
devices and the need to rinse the system between samples. The microsyringes and beakers are irradiated
with gamma rays and remain closed until use.
Features and Benefits:
- No risk of cross contamination with world wide patented microsyringes
- No downtime required for disinfection
- Direct and quick transition from validated existing outdated equipment, with pre-programmed spreading patterns
- Assuring high precision by monitoring all 6 zones of spreading on the plate
What's unique.
Disposable Micro-syringe: World wide patented system to forever eliminate the mistrust in the
classical spiral spreading instruments. Each sample remains during the whole process inside the
disposable microsyringe.
Immediate replacement: The EDDY JET contains all the spreading programs used in the past.
It can substitute immediately any old model of spiral platters.
Verifying capability: All the spiral spreadings can be checked at any time using a laboratory
balance. The volume can be confirmed in the six different zones.
General Specifications
|
Plunger syringe motor:
|
Step by step, 7,5º, 9 W
|
|
Turn table motor:
|
Step by step, 7.5º, 9 W
|
|
Radial displacement motor:
|
Step by step, 7.5º, 9 W
|
|
Maximum syringe volume:
|
100 µl
|
|
Maximum flow rate:
|
50 µl / sec
|
|
Minimum step volume:
|
< 0.1 µl
|
|
Syringe material:
|
polypropylene
|
|
Plunger material:
|
polyethylene H.D.
|
|
Reproducibility:
|
less than 1% error
|
|
Spreading modes stored:
|
all the accepted
|
|
Autochecking:
|
programmed in regions
|
|
External balance connection:
|
serial RS232
|
|
Printer connection:
|
serial RS232
|
|
Mains:
|
230/100 V, 50/60Hz
|
|
Power:
|
440 W
|
|
Dimensions: (WxHxD):
|
50x32x40cm / 19.7x12.6x16.1 in
|
|
Weight:
|
20 Kg / 44 lb.
|
|
|
|
|
Play Demo |
| Eddy Jet |
| 1700 |
220/230V 50/60Hz 1000 syr. 1000 beakers |
$16,453.00 |
add to cart |
| 1701 |
110/120V 50/60Hz 1000 syr. 1000 beakers |
$16,453.00 |
add to cart |
| Consumables |
| 1780 |
1000 disposable irradiated syringes |
$263.00 |
add to cart |
| 1790 |
1000 disposable irradiated beakers |
$122.00 |
add to cart |
| 1791 |
Waste container for used syringes |
$25.00 |
add to cart |
| Optional Accessories |
| 1715 |
Plate for 15 cm petri dishes |
$633.00 |
add to cart |
| 1724 |
Laminated table of volume |
$8.00 |
add to cart |
| 1829 |
Holder for old beakers sampling |
$63.00 |
add to cart |
| 2514 |
Communication cable for printer |
$51.00 |
add to cart |
| 2515 |
Communication cable for balance |
$51.00 |
add to cart |
| 3069 |
Printer (serial interface 40 columns) |
$759.00 |
add to cart |
| Spare Parts |
| 1710 |
Plate for 9 cm petri dishes |
$506.00 |
add to cart |
| 1903 |
Disk 3mm |
$38.00 |
add to cart |
| 1904 |
Disk 5mm |
$38.00 |
add to cart |
| 1949 |
Holder for beakers box |
$76.00 |
add to cart |
| 1950 |
Holder for micro-srynges box |
$101.00 |
add to cart |
| 1967 |
Holder for beakers sampling |
$63.00 |
add to cart |
| 1974 |
Holder for 10 beakers |
$51.00 |
add to cart |
| 3067 |
Plastic cover |
$127.00 |
add to cart |
|
Colony Counter
Contact manual colony counter: a pen gives three signals, audible, mark on the plate and addition on the display, anytime that a colony is counted.
A model accepts an stainless steel pen tip. It counts by touching the agar directly.
It can be used for any media just changing the dark field by a transparent grid.
|
General Specifications
|
Counter:
|
4 digits, 9 mm LED-Display for up to 9999 count
|
|
Connections:
|
Fibre marker with switch or fibre marker and metal pointer
|
|
Magnifying glasses:
|
Biconvex, 100 or 200 mm diam. 4Diopters, Magnification DINx2
|
|
Mains:
|
100/240 V, 50/60 Hz
|
|
Power:
|
60W
|
|
Dimensions (WxDxH):
|
20x30x40 cm / 7.9x11.8x15.7 in
|
|
Weight:
|
3 Kg / 6.6 lb
|
|
|
|
|
 |
| 1601 |
Colony Counter with 2 inputs (110V) |
4 digit, 9 mm, LED display |
Magnifying glass 0671
marker and metal pointer |
$1,733.00 |
add to cart |
| 1602 |
Colony Counter with 1 input (110V) |
4 digit, 9 mm, LED display |
Magnifying glass 0672 and marker |
$996.00 |
add to cart |
| 1604 |
Colony Counter with 1 input (110V) |
4 digit, 9 mm, LED display |
Magnifying glass 0671 and marker |
$1,247.00 |
add to cart |
| 1605 |
Colony Counter with 2 inputs (110V) |
4 digit, 9 mm, LED display |
Magnifying glass 0670
marker and metal pointer |
$1,904.00 |
add to cart |
| 601 |
Colony Counter with 2 inputs (230V) |
4 digit, 9 mm, LED display |
Magnifying glass 0671
marker and metal pointer |
$1,733.00 |
add to cart |
| 602 |
Colony Counter with 1 input (230V) |
4 digit, 9 mm, LED display |
Magnifying glass 0672 and marker |
$996.00 |
add to cart |
| 604 |
Colony Counter with 1 input (230V) |
4 digit, 9 mm, LED display |
Magnifying glass 0671 and marker |
$1,247.00 |
add to cart |
| 605 |
Colony Counter with 2 inputs (230V) |
4 digit, 9 mm, LED display |
Magnifying glass 0670
marker and metal pointer |
$1,904.00 |
add to cart |
| Optional Accsessories |
| 606 |
60mm centering device |
$114.00 |
add to cart |
| 608 |
80mm centering device |
$114.00 |
add to cart |
| 610 |
100mm centering device |
$114.00 |
add to cart |
| 612 |
120mm centering device |
$114.00 |
add to cart |
| 613 |
Mixed grid 1/16cm2 |
$25.00 |
add to cart |
| 615 |
150mm centering device |
$114.00 |
add to cart |
| 616 |
Mixed grid 1/9cm2 |
$25.00 |
add to cart |
| 625 |
Spiral grid |
$25.00 |
add to cart |
| 646 |
Fiber marker "F" normal point, "S" fine p. |
$89.00 |
add to cart |
| Spare Parts |
| Rack Magnifyng Glass 670 |
| 670 |
220/240V 50/60Hz 120mm lens with light |
$848.00 |
add to cart |
| 1670 |
100/127V 50/60Hz 120mm lens with light |
$848.00 |
add to cart |
| Lock Magnifyng Glass 671 |
| 671 |
220/240V 50/60Hz 120mm lens with light |
$582.00 |
add to cart |
| 1671 |
100/127V 50/60Hz 120mm lens with light |
$582.00 |
add to cart |
| Magnifyng Glass 672 |
| 672 |
100mm without light lock type |
$190.00 |
add to cart |
| General |
| 609 |
90mm centering device |
$63.00 |
add to cart |
| 617 |
??? reticula |
$25.00 |
add to cart |
| 618 |
Inox contact points |
$63.00 |
add to cart |
| 638 |
Dark contrast screen |
$10.00 |
add to cart |
| 676 |
Knurfed screw |
$25.00 |
add to cart |
| 677 |
Multilevel arm scew |
$25.00 |
add to cart |
| 680 |
139 X 139mm glass protector |
$15.00 |
add to cart |
|
|
|
|
Toll Free: (800) 886-4507 Telephone: (973) 992-0850 Fax: (973) 992-0827